Pizza Oven Kit
Pizza Oven Kit

Pizza Oven Kit

Availability: Special Order: Approximately 1 week
Kit includes:
28 arch bricks X 400mm
12 arch bricks X 200mm
2 chimney hole arch bricks X 400mm
10 floor blocks–450 X 300 X 50mm
1 cut floor block –450 X 300 X 50mm taper cut
1 X 25kg drum Rylbond pre-mixed mortar
2 X back wall blocks
3 X front wall blocks
1 timber support cradle kit with screws
4 cradle packers
1 chimney tube
1 piece chicken wire to shape dome
Kaowool insulation fibre
2mm notched trowel
2 X 20kg GP Cement
6 X 30kg bags 10mm drainage gravel
3 X 30kg bags medium bedding sand
1 X 1kg bag of colour oxide
1 X door
1 X safety mask
1 X safety glasses
1 X “Hot Surfaces” sign
1 X “MSDS Information Pack” for Rylbond Mortar, Kaowool and General Purpose Cement
What you need to supply:
The base for the oven to sit on (we can provide you with some suggestions)
Cement mixer or a wheel barrow
Rubber mallet
Drill and 5mm drill bit
Wooden stirrer for Rylbond
Protective gloves
Chimney stop or cover (this will help control the tempreature of the oven)

Photographs are for illustration purposes and to be used as an indication only.
This is a manufactured product, and variations and inconsistencies in size, colour and shape will occur. Batch variations can and do occur. There are applicable Australian Standards in place to cover variations in size, colour and breakages. Please order enough to cover your job from one batch and allow extra to cover breakages.

Please choose carefully as this product is a special order: refunds or exchanges cannot be given.